Overhead cabinet MAR-VAN for Ducato / Boxer / Jumper 2006+ / Movano 2021+ / Proace Max 2024+
Extension module for the basic MAR-VAN wall framework.
Listed prices are per 1 cabinet set.
| Category: | FRAMEWORKS |
|---|---|
| ? For vehicle: | Fiat/Peugeot/Citroen, Opel, Toyota |
| ? Type: | Add-on module |
This product is currently intended only for height H2.
Ceiling, overhead, wall-mounted or suspended? Whatever you call them, you'll master their production with ease.
We have prepared the cabinets in several lengths, so there is something for everyone. A lightweight and very strong cabinet frame that fits our MAR-VAN support structure perfectly.
Technical parameters:
- height: 300 mm
- depth: 325 mm
- length: 300, 400, 500, 600 mm
Installation:
- Place the spacers in the prepared positions in the upper, lower and rear parts of the side panels.
- We recommend pre-drilling the marked joint locations with a 2.5 mm diameter drill bit.
- Subsequently attach each spacer at both ends with three screws as shown in the figure below. Use 4 x 45 mm screws for the top and bottom sides of the spacer, and 3.5 x 35 mm screws for the side.
- Install 2 x hanging hinges to the bottom side of the upper spacer using 3.5 x 16 mm screws. Subsequently, attach your own custom-made doors to the hinges.
- Choose the side where you will place the support for the upper door opening and install the support.
- Attach the finished cabinet frame to the already installed MAR-VAN support structure using screws.
- This prepared cabinet base can then be clad with any material of your choice.
The ceiling structure module is not required for the installation of these cabinets.
.jpg)
Tips from us:
The cladding material for the cabinet can be very thin and lightweight, as the necessary strength is provided by the cabinet frame itself. You can use, for example, our veneered plywood in various decors with a thickness of only 4 mm, or alternatively cellular plastics, honeycomb boards or other lightweight materials.
The back wall of the cabinet does not need to be clad, which allows you to save further unnecessary weight. To prevent stored items from falling out, you can simply cover it with fabric, for example.
In the basic design, the cabinet is anchored with screws to our support structure. For maximum long-term strength, we recommend simultaneously bonding the individual joints with polyurethane adhesive. The exception is when you want the cabinets to be easily demountable at any time.
Package includes:
|
Rib |
Rib |
Spacer |
Spacer |
Support |
Screw |
Screw |
Hinge |
Hanger |
Screw |
|
| MAR 428 | MAR 429 | MAR 430 | MAR 434 | 248162 | 4x45 | 3.5x35 | 9071575 | 9071223 | 3.5x16 | |
| VAN 010 | 1 | 1 | 1 | 4 | 1 | 20 | 10 | 2 | 2 | 4 |
| MAR 428 | MAR 429 | MAR 431 | MAR 435 | 248162 | 4x45 | 3.5x35 | 9071575 | 9071223 | 3.5x16 | |
| VAN 011 | 1 | 1 | 1 | 4 | 1 | 20 | 10 | 2 | 2 | 4 |
|
MAR 428 |
MAR 429 |
MAR 432 |
MAR 436 |
248162 |
4x45 |
3.5x35 |
9071575 |
9071223 |
3.5x16 |
|
| VAN 012 | 1 | 1 | 1 | 4 | 1 | 20 | 10 | 2 | 2 | 4 |
|
MAR 428 |
MAR 429 |
MAR 433 |
MAR 437 |
248162 |
4x45 |
3.5x35 |
9071575 |
9071223 |
3.5x16 |
|
| VAN 013 | 1 | 1 | 1 | 4 | 1 | 20 | 10 | 2 | 2 | 4 |
| Designation | Dimensions (HxWxD) | Weight |
| VAN 010 | 300x600x325mm |
1.75 kg |
| VAN 011 | 300x500x325mm |
1.65 kg |
| VAN 012 | 300x400x325mm |
1.55 kg |
| VAN 013 | 300x300x325mm |
1.45 kg |
The weight of the construction is given as the weight of the bare ribs without hinges and the strut.
Discussion
Be the first who will post an article to this item!